The Lynx TWO "A" Cable Set

The Specs (in detail):

Analog I/O
A Model	Four inputs and Four outputs
B Model	Two inputs and Six outputs
C Model	Six inputs and Two outputs
Type	Electronically balanced or unbalanced, XLR connectors on L2Audio Cable
Level	+4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs
Bandwidth	< 10Hz - 92 kHz @ 200 kHz sample rate < 10Hz - 46 kHz @ 96 kHz sample rate < 10Hz - 23 kHz @ 48 kHz sample rate (analog input to analog output)
Input Impedance	Balanced mode: 24 kW , Unbalanced mode: 12 kW
Output Impedance	Balanced mode: 100 W , Unbalanced mode: 50 W
Output Drive Capability	600W impedance, 0.2 µF capacitance
A/D and D/A Type	24-bit, multi-level, delta-sigma
Sample Rates	8 kHz to 200 kHz, including all standard rates with variable adjustment
Bit Depth	8, 16, 24 or 32 bits
On-board Buffer Size	16 Kbytes per input and output stream (mono or stereo)
Analog In Performance - (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
Frequency Response	20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate
Dynamic Range	117 dB, A-wtd.
Signal-to-Noise	116 dB, A-wtd.
Channel Crosstalk	<-120 dB, 1 kHz signal @ -1dBFS
THD+N	-108 dB (0.0004%) @ -1 dBFS -104 dB (0.0006%) @ -8 dBFS 1 kHz signal, 22Hz - 22kHz BW
Analog Out Performance - (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
Frequency Response	20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate
Dynamic Range	117 dB, A-wtd.
Signal-to-Noise	117 dB, A-wtd.
Channel Crosstalk	<-120 dB, 1 kHz signal @ -1dBFS
THD+N	-97 dB (0.0014%) @ -1 dBFS -104 dB (0.0006%) @ -8 dBFS 1kHz signal, 22Hz - 22kHz BW
Digital I/O
Number / Type	One input and one output AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2 Sync cable
Sample Rates	32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sample Rate Conversion	Supports conversion ratios up to 3:1 on digital input, 128 dB dynamic range
Bit Depth	8, 16, 24 or 32 bits
Control/Status	Complete subcode and channel status support
On-board Buffer Size	16 Kbytes per input and output stream (mono or stereo)
LStream Expansion Ports
Number	One external and one internal
Compatibility	Supports Lynx ADAT, TDIF, and other multichannel expansion modules
Type	High-speed serial, eight channel input and output (each port) or sixteen channel input and output (single port), 24-bit data, 96kHz rate
SMPTE Time Code I/O
Type	LTC receiver (in) and generator (out) , BNC connectors on L2Sync Cable
Frame Rates	24, 25, 29.97, 30 Hz - drop and non-drop
Input Sync Rate	1/30 to 80 times nominal frame rate
Input Levels	200 mV to 10V / 10KW
Output Level	1V / 75W
Clock I/O
Number	External: one input and output, BNC connectors on L2 Sync Cable Internal: one input and output on board-mounted headers
Level / Impedance	TTL / 75W
Type	Input: word clock, 256X word clock, 13.5 and 27 MHz clocks; Output: word clock
On-board Digital Mixer
Channel Capacity	32 input channels, 16 sub outputs
Resolution / Dither	32-bit / TPDF, Shaped TPDF, or RPDF
Monitor Mixing	Any input to multiple outputs
Metering	Peak levels to -120 dB on all inputs and outputs
Connections
Audio Port	Bracket-mounted 25-pin female D-sub connector for analog audio input and output
Sync Port	Bracket-mounted 15-pin high-density female D-sub connector for digital input and output, sync in and out
Cables (Included)
L2 Audio Cable	25-pin male D-sub to male and female XLR connectors on six-foot shielded twisted pair cabling
L2 Sync Cable	15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair cabling and (4) female BNC connectors on two-foot 75W coaxial cabling
Software
Windows Drivers	Windows 98 / ME / NT/ 2000 / XP: MME, ASIO 2.0, and DirectSound
Macintosh Drivers	ASIO 2.0 for OS 9
L2 Mixer Application	Provides complete control of digital mixer and all hardware settings.
General
PCI Bus	Version 2.2 compliant
Data Transfers	Up to 132 Mbytes/sec using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering
Size	5.0" H X 7.4" W X 0.75" D (half-size PCI card)
LStream Expansion Modules - (Optional, for LStream ports)
LS-ADAT	Provides 16-channel/48kHz, 8-channel/96kHz or 4-channel/192kHz 24-bit ADAT optical I/O and ADAT Sync
LS-AES	Provides 8-channel/96kHz or 4-channel/192kHz 24-bit/96kHz AES-3 digital I/O
LS-TDIF	Provides 8-channel 24-bit TDIF I/O