|
|
Contact Details
|
|
Street Address
85 Zenith Road
Dandenong South VIC. 3164
Mailing Address
P.O. Box 550
Braeside VIC. 3195
|
|
Phone/Fax
Ph: 03 9794 6799
Fax: 03 9769 2477
|
|
E-Mail Form
Contact Us
|
We Accept
And Direct Deposit
HERE
|
|
|
Secured by RapidSSL
|
|
|
|
Product Information
|
|
The Lynx ONE Package
|
|
24bit, Stereo PCI Digital Audio Interface
|
|
Representing a new level in integration and professional capabilities, LynxONE is the perfect "front-end" for any studio quality audio or MIDI workstation. Whether an application requires uncompromising analog I/O, bit-perfect digital I/O, or 32 channels of low-latency MIDI, LynxONE is up to the task. LynxONE's compatibility with all popular Windows based audio editing and MIDI sequencing software allows users to choose their own working environments. Applications include critical audio recording and editing, CD mastering, restoration, audio for video, music composition, and MIDI sequencing.
|
The Hardware:
The Lynx engineering team has utilized its years of experience designing low-noise analog audio circuitry in the design of the LynxONE's analog section - a task that is especially critical in a 24-bit system. Through careful scrutiny of every component in the analog signal path, LynxONE delivers exceptionally low-noise and distortion levels that rival the performance of studio equipment costing thousands more.
The robust outputs are capable of driving the excessive capacitance of long cables and 600-ohm loads. Both balanced and unbalanced connections are supported.
Selection of either +4 dBu or -10 dBV nominal levels is accomplished through software control of gold-contact relays. In either trim setting, a generous 16 dB of headroom is provided to easily handle musical peaks and to further boost the signal level above the studio noise floor.
LynxONE incorporates innovative PCB layout and circuit design techniques to combat these unwanted signals. Because of this, LynxONE offers 103dB of "real-world" dynamic range when installed in a typical computer.
The Specs (in brief):
Stereo 24-bit analog input and outputs with +4dBu or -10dBV levels, less than 0.0025% THD+N, and dynamic range greater than 103dB (real specs, not just converter specs).
Digital I/O supporting AES/EBU and S/P DIF formats at sample rates up to 96kHz.
Independent, 24-bit audio stream architecture supports simultaneous four-channel recording and playback.
Supports 8, 16, 24 and 32 bit audio file formats.
Two smart, deeply buffered MIDI ports.
Low-jitter, highly adjustable sample clock tunable to all rates 8kHz to 100kHz.
Clock inputs and outputs sync to word, word*256, video clocks and to other LynxONE's.
Reconfigurable FPGA-based engine supports record monitor mixing and stand-alone A>D or D>A conversion capability.
Mixer application provides software-controlled configuration - no jumpers!
Ships with complete 6' Audio cable and 2' MIDI/Clock cable set.
Audio cable is DB25 to balanced XLR for all connections.
MIDI/Clock cable is HD15 to standard MIDI connectors for both inputs and outputs. BNC for Clock input and output.
Internal Clock input and output connectors for synchronizing multiple LynxONE's or connection to video capture/playback adapter.
Windows 98 / ME / NT / 2000 / XP Drivers, and Mac ASIO Drivers
|
The Lynx ONE Audio Card
The Lynx ONE Cable Set
The Lynx Mixer Control Panel
|
|
The Specs (in detail):
|
Analog I/O
|
|
Number / Type
|
Two inputs and two outputs / cross-coupled electronically balanced or unbalanced, XLR connectors on Audio cable
|
|
Level
|
+4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max.
|
|
Input Impedance
|
Balanced mode: 24 kW , Unbalanced mode: 12 kW
|
|
Output Impedance
|
Balanced mode: 100 W , Unbalanced mode: 50 W
|
|
Output Drive Capability
|
600W impedance, 0.16 µF capacitance
|
|
A/D and D/A Type
|
Crystal Semiconductor, 24-bit, 128X oversampling, delta-sigma
|
|
Sample Rates
|
8 kHz to 50 kHz, including all standard rates with high-resolution adjustment
|
|
Bit Depth
|
8, 16, 24 or 32 bits
|
|
On-board Buffer Size
|
8 Kbytes X 2, for L/R input and output
|
|
Analog Performance - (measured in 24-bit mode with card installed in computer)
|
|
Frequency Response
|
20 - 20 kHz, +0/-0.35 dB
|
|
Signal-to-Noise
|
>99 dB, A-wtd., analog in to analog out
|
|
Channel Crosstalk
|
<-103 dB, analog in to analog out, 1 kHz signal @ -1 dBFS
|
|
Input Dynamic Range
|
106dB, A-wtd.
|
|
Input THD+N
|
-93dB (0.0022%) typ., 1 kHz signal @ -1 dBFS, 22 - 22kHz BW, analog input to digital output
|
|
Output Dynamic Range
|
106dB, A-wtd.
|
|
Output THD+N
|
-96dB (0.0015%) typ., 1 kHz signal @ -1 dBFS, 22 - 22kHz BW, digital input to analog output
|
|
Digital I/O
|
|
Number / Type
|
One input and one output
AES/EBU or S/P DIF format, transformer coupled, XLR connectors on Audio cable
|
|
Sample Rates
|
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
|
|
Bit Depth
|
8, 16, 24 or 32 bits
|
|
On-board Buffer Size
|
8 Kbytes X 2, one each for input and output
|
|
MIDI I/O
|
|
Number / Type
|
Two ports each with input and output / Standard opto-isolated, 5-pin female DIN connectors on MIDI/Clock cable
|
|
Buffer Size
|
64 bytes, receive and transmit
|
|
Clock I/O
|
|
Number
|
External: one BNC input and output on MIDI/Clock cable
Internal: one input and output on board-mounted headers
|
|
Level / Impedance
|
TTL / 75W
|
|
Input Frequency Range
|
25 kHz to 27 MHz
|
|
General
|
|
PCI Bus
|
Version 2.1 compliant, Transfer rate: up to 132 Mbytes/sec
|
|
Power
|
+5V @ 400 mA, +12V @ 220 mA, -12V @ 95 mA
|
|
Size
|
5.0" H X 7.4" W X 0.75" D (half-size PCI card)
|
|
Connections
|
|
Audio Port
|
Bracket-mounted 25-pin female D subminiature connector for L/R analog in, L/R analog out, digital in and out
|
|
MIDI/Clock Port
|
Bracket-mounted 15-pin high-density female D subminiature connector for MIDI port 1 in and out, MIDI port 2 in and out, clock in and out
|
|
Cables
|
|
Audio (included)
|
Six foot, 25-pin male D-sub to (3) male XLR and (3) female XLR connectors, shielded twisted pair cabling
|
|
MIDI/Clock (included)
|
Two foot, 15-pin high-density male D-sub to (4) 5-pin female DIN connectors with shielded twisted pair cabling and (2) female BNC connectors with 75W coaxial cabling
|
|
|
Order ON-LINE Now!
|
|
Lynx Studio Technology - Lynx ONE
END OF LINE RUN-OUT SPECIAL
LynxONE is the perfect "front-end" for any studio quality audio or MIDI workstation. Whether an application requires uncompromising analog I/O, bit-perfect digital I/O, or 32 channels of low-latency MIDI, LynxONE is up to the task. LynxONE's compatibility with all popular Windows based audio editing and MIDI sequencing software allows users to choose their own working environments. Applications include critical audio recording and editing, CD mastering, restoration, audio for video, music composition, and MIDI sequencing.
|
Our Price
GST Inc.
$595.00
$540.90 GST Ex.
|
|
|
Diamond Cut
