Welcome to Multimedia Music - Specialists in Superior PC Audio and Sound Enhancement Technology

	Home
	About Us
	Contact Details

Demos
Cart Contents
Go To Checkout

Specialists in Superior PC Audio and Sound Enhancement Technology

Products Categories
	Audio Restoration & Enhancement Software
Diamond Cut DC SEVEN NEW! DC LIVE 6 DC SIX Millennium
	Professional Digital Audio Hardware
PRO Stereo Hardware Lynx Studio Tech. Lynx ONE Lynx L22 Marian Marc8 NEW! PRO Multichannel Hardware Lynx Studio tech. Lynx TWO Lynx AES16 Lynx AuroraNEW! Lynx LS-ADAT Lynx LS-AES
	CD Labelling and Colour Printing Solutions
	MUST Have Accessories

Contact Details

Street Address
85 Zenith Road
Dandenong South VIC. 3164
Mailing Address
P.O. Box 550
Braeside VIC. 3195

Phone/Fax
Ph: 03 9794 6799
Fax: 03 9769 2477

E-Mail Form
Contact Us

We Accept
And Direct Deposit
HERE

Secured by RapidSSL

Product Information

The Lynx LS-AES Card

Lynx LS-AES™ for LynxTWO/L22/AES16

The LS-AES is an 8-channel AES/EBU or S/PDIF LStream interface module that is designed for use with the LynxTWO and Lynx L22 professional audio interfaces. The LS-AES provides four inputs and outputs that support professional AES/EBU and consumer S/PDIF digital I/O formats. Connections are transformer coupled with pro-quality sample rate conversion (SRC) available on all inputs. The LS-AES is also compatible with Dolby Digital and DTS encoded formats.

Running at a sample rates up to 96 kHz, the LS-AES provides eight I/O channels in single-wire mode and four channels in dual-wire mode. At 192 kHz, four channels of I/O are available in dual-wire mode and two channels in quad-wire mode. For additional channel capacity, two LS-AES cards can be used simultaneously with one LynxTWO or L22.

The LS-AES can handle both asynchronous and synchronous studio configurations. SRC can be enabled independently on each digital input to accommodate asynchronous signals from multiple digital devices Alternatively, all inputs can be run synchronously and any input can be selected as the system clock source. The card can also be synchronized to a word clock or composite video received by the host LynxTWO.

The LS-AES installs in an empty bracket internally in your computer, no PCI slot required.

The Specs (in detail):

Digital I/O

Number Four inputs and four outputs, transformer coupled

Format 24-bit AES/EBU or S/PDIF supported, on-board impedance and level switching

Wiring Modes /
Sample Rates Single-wire @ 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz sampling rates
Dual-wire @ 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz sampling rates
Quad-wire @ 176.4 kHz and 192 kHz sampling rates

Channels 8 in/out in single-wire mode
4 in/out in dual-wire mode
2 in/out in quad-wire mode

Sample Rates Conversion Support for conversion ratios up to 3:1. Available on any input or output.

Channel Expansion Support for two LS-AES cards per LynxTWO, L22 or LynxAES16 provides double channel capacity

Clock Synchronisation

Clock Sources Host card (LynxTWO or L22) or any LS-AES digital input

Modes Master mode: utilizes LynxTWO, L22 oe LynxAES16 low-jitter sample clock to drive external AES devices
Slave mode: word clock derived from any digital input

Architecture

Core FPGA-based core. Support for field upgrades of firmware.

Audio Devices Via host card, the LS-AES’s four digital inputs and outputs are visible to applications as four stereo record devices and four stereo play devices

Routing/Mixing Integrates with host card’s digital mixer to allow independent routing of AES I/O with host card analog and digital I/O

Connections

I/O Ports Bracket-mounted 25-pin female D-sub connector

LStream Board-mounted header for connection to host audio card

General

Host Interface Lynx proprietary LStream™ Interface: 24.5 Mbps bi-directional

Requirements One available bracket position (PCI slot not required), Host card: LynxTWO, L22 or Lynx AES-16

Size 2.990" H X 5.000" W

EMI Certifications FCC and CE

Order ON-LINE Now!

Lynx Studio Technology - Lynx LS-AES
Lynx LS-AES™ for
LynxTWO/L22/AES16
The LS-AES is an 8-channel AES/EBU or S/PDIF LStream interface module that is designed for use with the LynxTWO and Lynx L22 professional audio interfaces. The LS-AES provides four inputs and outputs that support professional AES/EBU and consumer S/PDIF digital I/O formats. Connections are transformer coupled with pro-quality sample rate conversion (SRC) available on all inputs. The LS-AES is also compatible with Dolby Digital and DTS encoded formats.

Our Price
GST Inc.
$695.00
$631.81 GST Ex.