Welcome to Multimedia Music - Specialists in Superior PC Audio and Sound Enhancement Technology

	Home
	About Us
	Contact Details

Demos
Cart Contents
Go To Checkout

Specialists in Superior PC Audio and Sound Enhancement Technology

Products Categories
	Audio Restoration & Enhancement Software
Diamond Cut DC SEVEN NEW! DC LIVE 6 DC SIX Millennium
	Professional Digital Audio Hardware
PRO Stereo Hardware Lynx Studio Tech. Lynx ONE Lynx L22 Marian Marc8 NEW! PRO Multichannel Hardware Lynx Studio tech. Lynx TWO Lynx AES16 Lynx AuroraNEW! Lynx LS-ADAT Lynx LS-AES
	CD Labelling and Colour Printing Solutions
	MUST Have Accessories

Contact Details

Street Address
85 Zenith Road
Dandenong South VIC. 3164
Mailing Address
P.O. Box 550
Braeside VIC. 3195

Phone/Fax
Ph: 03 9794 6799
Fax: 03 9769 2477

E-Mail Form
Contact Us

We Accept
And Direct Deposit
HERE

Secured by RapidSSL

Product Information

The Lynx LS-ADAT Card

Lynx LS-ADAT™ for LynxTWO/L22/AES16

The LS-ADAT is a full-function ADAT interface that provides two ADAT lightpipe inputs and outputs and an ADAT Sync In Port for the LynxTWO/L22/AES16 professional PCI cards. Operating at a sample rate of 48 kHz, the LS-ADAT I/O channel capacity is 16. Higher sample rates are supported using S/MUX technology: 8 channels at 96 kHz and 4 channels at 192kHz.

The ADAT Sync In port feeds on-board time code control logic that provides two methods of sample-accurate synchronization. In systems using ASIO compatible audio applications, the LS-ADAT utilizes Steinberg's ASIO Positioning Protocol for synchronization to ADAT time code. Alternatively, synchronization using the LS-ADAT's cue point capability initiates recording or playback with sample period resolution. The LS-ADAT can also transmits time code via MTC for general compatibility with many applications.

The LS-ADAT offers a wide variety of sample clock synchronizations options. Its sample clock source can be derived from a word clock or composite video received by the LynxTWO. In addition, either lightpipe input or the Sync In port can also be selected as the clock source.

The LS-ADAT Installs in an empty bracket internally in your computer, no PCI slot required.

The Specs (in detail):

ADAT Optical I/O

Number/Type Two inputs and two outputs, compatible with Alesis ADAT Type I and Type II Optical Digital Interface Protocol, up to 24-bit data

Channels 16 @ 44.1kHz 48 kHz sample rates
8 @ 88.2 kHz and 96 kHz sample rates, S/MUX enabled
4 @ 176.4 kHz and 192 kHz sample rates, SMUX enabled

Input Receiver Fast-locking phase-locked loop with 30 kHz to 55 kHz lock range

ADAT Synchronisation I/O

Number/Type One 9-pin Sync In port compatible with Alesis Synchronization Protocol

Signals Time code (sample count), word clock, and MIDI control data

Sample Accurate Methods ASIO Positioning Protocol and hardware-based SMPTE frame address matching logic (Cue Point).

MTC Time code to MTC conversion

MIDI MIDI port transfers serial input control data

Clock Synchronisation

Clock Sources Host card (LynxTWO or L22), Optical In 1, Optical In 2, ADAT Sync In

Modes Master mode: utilizes LynxTWO or L22 low-jitter sample clock to drive external ADAT devices
Slave mode: word clock derived from external ADAT device

Architecture

Core FPGA-based core. Support for field upgrades of firmware.

Audio Devices Host Card is visible to applications as eight stereo record devices corresponding to ADAT optical inputs 1 – 16 and eight stereo play devices corresponding to ADAT optical outputs 1 – 16.

Routing/Mixing Integrates with host card’s digital mixer to allow independent routing of ADAT I/O with host card analog and digital I/O.

Connections

I/O Ports (4) Bracket-mounted TOSLINK connectors. (1) 9-pin female D-sub connector.

Other LStream interface headers

General

Host Interface Lynx proprietary LStream™ Interface: 24.5 Mbps bi-directional

Requirements One available bracket position (PCI slot not required), Host card: LynxTWO, L22 or Lynx AES-16

Size 3.0” H X 5.0” W X 0.75” D

EMI Certifications FCC and CE

Order ON-LINE Now!

Lynx Studio Technology - Lynx LS-ADAT
Lynx LS-ADAT™ for
LynxTWO/L22/AES16
The LS-ADAT is a full-function ADAT interface that provides two ADAT lightpipe inputs and outputs and an ADAT Sync In Port for the LynxTWO/L22/AES16 professional PCI cards. Operating at a sample rate of 48 kHz, the LS-ADAT I/O channel capacity is 16. Higher sample rates are supported using S/MUX technology: 8 channels at 96 kHz and 4 channels at 192kHz.

Our Price
GST Inc.
$295.00
$268.18 GST Ex.