|
|
Contact Details
|
|
Street Address
85 Zenith Road
Dandenong South VIC. 3164
Mailing Address
P.O. Box 550
Braeside VIC. 3195
|
|
Phone/Fax
Ph: 03 9794 6799
Fax: 03 9769 2477
|
|
E-Mail Form
Contact Us
|
We Accept
And Direct Deposit
HERE
|
|
|
Secured by RapidSSL
|
|
|
|
Product Information
|
|
The Lynx L22 Package
|
|
24bit 192kHz, Stereo PCI Digital Audio Interface
|
|
The Lynx L22 is a professional audio interface card intended for use in the most demanding audio recording, post-production, broadcast, and measurement applications. Based on LynxTWO technology, the L22 can capture or generate signals beyond the audio bandwidth up to 100 kHz with extreme accuracy.
Using proprietary circuit topologies and custom components in the analog stages coupled with the latest converter technology, the L22 achieves a 117 dB dynamic range. Most importantly, advanced noise-rejection design techniques are incorporated to maintain this performance in real world use from computer to computer.
Glitch-free recording and playback is assured due to the L22's large on-board buffers and extremely efficient zero-wait state DMA engine. These features provide tolerance to system latencies and significantly reduce load on the host CPU.
The onboard digital mixer is extremely flexible allowing the L22 to adapt to any studio or workstation configuration. Each of the mixer's 16 outputs is capable of mixing signals from 16 physical inputs or 16 playback tracks with 32-bit precision. A choice of dither algorithms is available on each input to mask low-level artifacts while reducing word widths to 8, 16, or 20 bits.
The L22 provides I/O expansion via its two LStream™ ports. Combined, these ports allow 16 channels of additional I/O from external ADAT, AES/EBU, or TDIF devices. The ports can also be used to route data and synchronize to other L22's or LynxTWO's to create high channel-count systems.
As with other Lynx products, the L22 provides unprecedented compatibility with a wide range of platforms and operating systems. Lynx device drivers are developed in-house to insure quality and robustness.
|
The Specs (in brief):
200kHz sample rate / 100kHz analog bandwidth
Two 24-bit balanced analog inputs and outputs
+4dBu or -10dBV line levels selectable per channel pair
24-bit AES3 or S/PDIF I/O with full status and subcode support
Sample rate conversion on digital input
Non-audio digital I/O support for Dolby Digital® and HDCD
32-channel / 32-bit digital mixer with 16 sub outputs
Multiple dither algorithms per channel
Word, 256 Word, 13.5MHz or 27MHz clock sync
Extremely low-jitter tunable sample clock generator
Dedicated clock frequency diagnostic hardware
Multiple-board audio data routing and sync
Two LStream™ ports support 8 additional I/O channels each
Compatible with LStream modules for ADAT, TDIF and AES/EBU standards
Zero-wait state, 16-channel, scatter-gather DMA engine
Windows 98 / ME / NT / 2000 / XP Drivers
|
The Lynx L22 Audio Card
The Lynx L22 Cable Set
|
|
The Specs (in detail):
|
Analog I/O
|
|
Number / Type
|
Two inputs and two outputs / cross-coupled electronically balanced or unbalanced, XLR connectors on L22 Audio cable
|
|
Level
|
+4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs
|
|
Bandwidth
|
< 10Hz - 92 kHz @ 200 kHz sample rate
< 10Hz - 46 kHz @ 96 kHz sample rate
< 10Hz - 23 kHz @ 48 kHz sample rate
(analog input to analog output)
|
|
Input Impedance
|
Balanced mode: 24 kW , Unbalanced mode: 12 kW
|
|
Output Impedance
|
Balanced mode: 100 W , Unbalanced mode: 50 W
|
|
Output Drive Capability
|
600W impedance, 0.2 µF capacitance
|
|
A/D and D/A Type
|
24-bit, multi-level, delta-sigma
|
|
Sample Rates
|
8 kHz to 200 kHz, including all standard rates with variable adjustment
|
|
Bit Depth
|
8, 16, 24 or 32 bits
|
|
On-board Buffer Size
|
16 Kbytes per input and output stream (mono or stereo)
|
|
Analog In Performance - (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
|
|
Frequency Response
|
20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate
|
|
Dynamic Range
|
117 dB, A-wtd.
|
|
Signal-to-Noise
|
116 dB, A-wtd.
|
|
Channel Crosstalk
|
<-120 dB, 1 kHz signal @ -1dBFS
|
|
THD+N
|
-108 dB (0.0004%) @ -1 dBFS
-104 dB (0.0006%) @ -8 dBFS
1 kHz signal, 22Hz - 22kHz BW
|
|
Analog Out Performance - (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
|
|
Frequency Response
|
20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate
|
|
Dynamic Range
|
117 dB, A-wtd.
|
|
Signal-to-Noise
|
117 dB, A-wtd.
|
|
Channel Crosstalk
|
<-120 dB, 1 kHz signal @ -1dBFS
|
|
THD+N
|
-97 dB (0.0014%) @ -1 dBFS
-104 dB (0.0006%) @ -8 dBFS
1kHz signal, 22Hz - 22kHz BW
|
|
Digital I/O
|
|
Number / Type
|
One input and one output
AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L22 Sync cable
|
|
Sample Rates
|
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
|
|
Sample Rate Conversion
|
Supports conversion ratios up to 3:1 on digital input, 128 dB dynamic range
|
|
Bit Depth
|
8, 16, 24 or 32 bits
|
|
Control/Status
|
Complete subcode and channel status support
|
|
On-board Buffer Size
|
16 Kbytes per input and output stream (mono or stereo)
|
|
LStream Expansion Ports
|
|
Number
|
One external and one internal
|
|
Compatibility
|
Supports Lynx ADAT, TDIF, and other multichannel expansion modules
|
|
Type
|
High-speed serial, eight channel input and output (each port) or sixteen channel input and output (single port), 24-bit data, 96kHz rate
|
|
Clock I/O
|
|
Number
|
External: one input and output, BNC connectors on L22 Sync Cable
Internal: one input and output on board-mounted headers
|
|
Level / Impedance
|
TTL / 75W
|
|
Type
|
Input: word clock, 256X word clock, 13.5 and 27 MHz clocks; Output: word clock
|
|
Connections
|
|
Audio Port
|
Bracket-mounted 25-pin female D-sub connector for analog audio input and output
|
|
Sync Port
|
Bracket-mounted 15-pin high-density female D-sub connector for digital input and output, sync in and out
|
|
Cables (Included)
|
|
L22 Audio Cable
|
25-pin male D-sub to male and female XLR connectors on six-foot shielded twisted pair cabling
|
|
L22 Sync Cable
|
15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair cabling and (4) female BNC connectors on two-foot 75W coaxial cabling
|
|
Software
|
|
Windows Drivers
|
Windows 98 / ME / NT/ 2000 / XP: MME, ASIO 2.0, and DirectSound
|
|
Macintosh Drivers
|
ASIO 2.0 for OS 9
|
|
L22 Mixer Application
|
Provides complete control of digital mixer and all hardware settings.
|
|
General
|
|
PCI Bus
|
Version 2.2 compliant
|
|
Data Transfers
|
Up to 132 Mbytes/sec using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering
|
|
Size
|
5.0" H X 7.4" W X 0.75" D (half-size PCI card)
|
|
LStream Expansion Modules - (Optional, for LStream ports)
|
|
LS-ADAT
|
Provides 16-channel/48kHz, 8-channel/96kHz or 4-channel/192kHz 24-bit ADAT optical I/O and ADAT Sync
|
|
LS-AES
|
Provides 8-channel/96kHz or 4-channel/192kHz 24-bit/96kHz AES-3 digital I/O
|
|
LS-TDIF
|
Provides 8-channel 24-bit TDIF I/O
|
|
|
Order ON-LINE Now!
|
|
Lynx Studio Technology - Lynx L22
24bit/192kHz Stereo
Audio Interface
The Lynx L22 is a professional audio interface card intended for use in the most demanding audio recording, post-production, broadcast, and measurement applications. Based on LynxTWO technology, the L22 can capture or generate signals beyond the audio bandwidth up to 100 kHz with extreme accuracy, and has 117 dB of dynamic range.
|
Our Price
GST Inc.
$995.00
$904.54 GST Ex.
|
|
|
Diamond Cut
